Technics RS-TR979 Operating Instructions

0 Power “ 6 STANDBY/ON” switch
(POWER, 6 STANDBY/ON)
This switch switches ON and OFF the secondary circuit
power only. The unit is in the "standby" condition when this
switch is pressed to set it to the c!> STANDBY mode.
Regardless of the switch setting, the primary circuit Is
always "live" as long as the power cord is connected to an
electrical outlet.
(D Dolby noise-reduction button (DOLBY NR)
This button is used to reduce the hissing noise heard from
the tape. This unit is provided with both the B-type and C-type
noise-reduction systems. (See pages 9, 10 and 12.)
(D Recording-balance control (BALANCE)
This control is used to balance the left and right sound levels
during recording. (See page 12.)
® Recording-level control (REC LEVEL)
This control is used to regulate the recording level.
(See page 1 2.)
(D Bias-adjustment control (BIAS ADJUST)
This control is used to equalize the frequency response dur¬
ing recording. (See page 14.)
(D Reverse-mode selector (REVERSE MODE)
This selector is used for selection of the reverse mode (for
either playback or recording).
(See pages 9, 10, 12, 15, and 16.)
0 Headphones jack (PHONES)
<D Synchro-start button (SYNCHRO START)
This button is used to start a tape-to-tape recording,
simultaneously starting deck 1 (the playback deck) and deck
2 (the recording deck). (See page 16.)
(D Tape-to-tape recording-speed button
(SPEED)
This button is used to select the recording speed during
tape-to-tape recording. (See page 16.)
(SD Timer switch (E TIMER)
This switch is used to automatically begin a tape recording
or tape playback at a certain time, selected by an optional
timer. (See page 18.)

Technics RS-TR979 Specifications

General

Brand	Technics
Model	RS-TR979
Category	Cassette Player
Language	English