Why can't my Technics Stereo Receiver play Dolby Digital or DTS sources?
The PCM FIX mode or the DTS FIX mode may be on; turn them off. Alternatively, an SFC mode may be active; switch to SURROUND or STEREO mode.
How to fix a dim display on my Technics Stereo Receiver?
The dimmer is likely on. Press [DIMMER] to restore the display to normal.
What to do if an AM station is not clear on Technics Stereo Receiver?
The frequency step might be set to 10 kHz. Hold down [BAND] for about 3 seconds to change the frequency step to 9 kHz.
Why do I hear an unusual beat sound from my Technics Stereo Receiver?
A television nearby may be the cause. Separate the two or turn the television off.
What does 'F70' on my Technics Stereo Receiver mean?
Turn off the unit and then turn it on again, or disconnect the AC mains lead and then connect it to your household mains socket again.
Detailed specifications for the FM tuner section, including sensitivity and distortion.
Specifications for the AM tuner section, covering frequency range and selectivity.
Key performance metrics for the audio amplifier stages, including power and distortion.
Procedures and warnings prior to commencing repair work.
Explanation of the unit's protection circuitry and its operation.
Steps for verifying operation and replacing major internal components.
Layout of front panel controls and list of included accessories.
Schematics, PCB layouts, and component parts lists.
List of all parts related to the unit's cabinet and chassis.
Comprehensive list of all electrical components used in the unit.
Details on packing materials and accessories included with the product.
Power| power supply | AC 230–240 V, 50 Hz |
|---|---|
| power consumption | 270 W |
| power consumption in standby mode | 2 W |
Amplifier Section| power output at 240 V | 2 x 100 W (6 Ω) |
|---|---|
| continuous power output | 2 x 80 W (6 Ω) |
| total harmonic distortion | 0.09 % (6 Ω) |
Weight and Dimensions| dimensions | 430 x 180 x 370 mm |
|---|---|
| mass | 12.7 kg |
Power| power supply | AC 230–240 V, 50 Hz |
|---|---|
| power consumption | 270 W |
| power consumption in standby mode | 2 W |
Amplifier Section| power output at 240 V | 2 x 100 W (6 Ω) |
|---|---|
| continuous power output | 2 x 80 W (6 Ω) |
| total harmonic distortion | 0.09 % (6 Ω) |
Weight and Dimensions| dimensions | 430 x 158 x 370 mm |
|---|---|
| mass | 11.7 kg |
To Next Page
