Technics SA-GX910 User Manual

Technics
5
M
e
m
oO
ry
t
Uu
n
e
r
Oo
pe
ra
t
|
r@]
n
(to
listen
to
broadcast
stations
preset
into
memory)
Have you completed the steps on page 18 of
“Basic Operating Procedure” and on pages
21~22 of “Memory presettings” ?
1 Press the “TUNER” button.
2 Select the desired “CHANNEL”.
To designate channels 1~9:
Press the appropriate (1—9) preset-tuning button.
To designate channels 10-~ 30:
® Press the button for the most significant digit (1, 2 or 3).
@ Press the button for the least significant digit (1—0) within
2 seconds after pressing the first button.
If the interval between pressing the first button and pressing
the second button is more than about 2 seconds, the setting
may not be made correctly. If this happens, repeat the setting
Procedure once again.
Station Memory File (Use this file to record your memory selections.)
This feature is convenient for use when trying to locate a certain
broadcast, or to listen to each station briefly to hear what is being
broadcast.
Press the memory scan button.
Each frequency will then be heard (in sequence)
for about 3 seconds.
The preset channel number will be displayed in the channel
display.
If noise is excessive in the FM mode
Press the FM mode selector.
eid
S
-—23—
Channel
selection
using
the
memory
scan
button
Preset channel number
QUARTZ | STEREO im]
(fF
When a broadcast you want to listen to is found
Press the memory scan button MEMORY
(The broadcast will continue, even after 3 seconds
have passed.) SS
The sound will then be heard in monaural and the FM stereo
indicator will not illuminate. If the broadcast signal is weak, or if
there is a large amount of interference, sounds can be heard
more clearly.

Technics SA-GX910 Specifications

General

Brand	Technics
Model	SA-GX910
Category	Stereo Receiver
Language	English