Technics SA-GX910 User Manual

To enjoy “Multi-Function play”
A series of codes (functions) can be stored as a “group” in one of
the three “MULTI USE” memory keys. For example, you can use
one of the keys to program VCR ON, TV ON, VCR PLAY controls in
sequence.
Program the
desired
control
function.
Simply pressing the relevant multi-function key takes care of all
these controls in a single operation, so you can start watching a
video with one-touch convenience.
Three keys (M1, M2, M3) can store up to 8 controls each.
To program the multi-function keys —£4-—-———-___LLLLL_-——
1 Switch ON the display.
2 Select “MULTI”.
{Press two times.)
3 Press “ENTER”.
“MULTI” will flash.
4 Select the key you want to program.
“MULTI" and “LEARN” will flash.
To stop programming
Press the “USE” key.
To alter the program
Repeat the above procedures.
(The previously programmed contents will be erased.)
5 Select the equipment to be controlled.
6 Program the desired control function.
Repeat this step until all desired controls are
programmed.
When the control is programmed correctly, the “OK” sign is
displayed.
When 8 control functions have been entered, the unit will
return to the “use” mode.

Technics SA-GX910 Specifications

General

Brand	Technics
Model	SA-GX910
Category	Stereo Receiver
Language	English