Technics SL-PS740A - Cleaning of Lens

m@ CONNECTIONS
Before making connections, be sure that the power of this unit and
all other system components is first turned off.
See the operating instructions of the amplifier or the cassette deck
for details.
Note:
The configuration of the AC outlet and AC power supply cord differs
according to area. 3
& OU
OUT SYNCHRO
(a) © @ EDIT
1
|
DIGITAL
OPTICA
OUT
fe;
SL-PS740A
Rear panel of this unit
(Tutoteen takaosassa)
(Apparatens baksida)
ed}(whit
(rechtwrite)
m4 2
1 Connect the stereo connection cable (in-
cluded) to the ‘‘CD” or “AUX” terminals of the
amplifier.
2 Connect the synchro edit cable (included with
the cassette deck) to the ‘“‘SSYNCHRO EDIT”’
terminal of the Technics cassette deck which
is equipped with the synchro edit function.
3 Connect the optical-fiber cable (not included)
to the ‘DIGITAL INPUT” terminal of the am-
plifier.
This terminal can be used for connection with other equipment
that has a digital input termina!. such as and amplifier, by using
an optical-fiber cable (not inciuded). A dust-protection cap is
inserted in this terminal. Remove this cap only when a connec-
tion is to be made to this terminal.
Mi CLEANING OF LENS
If the lens is stained causing sound skip or operation failure,
open the top cover by pressing the open button, and clean
the lens.
e To remove dust or dirt
Blow the lens with the blower provided in the cleaning kit
to remove dust or dirt.
Dust or dirt Fingerprint
e To remove fingerprint
If the blower is not enough, moisten the cotton rod
with the lens cleaner solution and wipe the lens with
from center of the lens to outside.
3
__
eFor (EB) area
Househoid
AC outlet
¢For (E) and (EG) areas
Household
| AC outlet
FOR UNITED KINGDOM ONLY
BE SURE TO READ THE CAUTION FOR AC
POWER SUPPLY CORD ON PAGE 3 BE-
FORE PROCEEDING TO STEP 4.
4 Connect the AC power supply cord (included)
to the “AC OUTLET” of the amplifier or the
household AC outlet.
Insertion of Connector
Even when the connector is per-
fectly inserted, depending on the
type of inlet used, the front part of
the connector may jut out as
shown in the drawing.
However there is no problem
using the unit.
Approx. 6 mm
Appliance inlet
Cautions:
@ Do not directly apply the cleaner solution to the lens.
Do not apply too much solution to the cotton rod or
otherwise the solution will flow into the player.
@ Wipe the lens carefully. Do not give too much stress to
the lens or otherwise it may scratch the lens or cause
optical pickup trouble.
e@ if the solution should be too much applied, wipe the
lens with a dry cotton rod.
Lens cleaning kit (Part No. : SZZP1038C)
Cotton
rod
Cleaner
Blower