Technify Motors CD-135 User Manual

Operation & Maintenance Manual
CD-135 / CD-155
OM-02-02
Chapter:
Issue:
Issue date:
Page:
Content:
02-OM-06-02
4
30.07.2014
60
74
Revision no.:
Revision date:
7
20.07.2016
3. Check the magnet of the oil drain plug for chips.
4. Remount the oil drain plug with a new sealing ring and
tighten it to the specified tightening torque.
Tightening Torque:
25 Nm
5. Loosen the filter cap of the gearbox oil filter an remove it.
See Fig. 6.49.
6. Remove the oil filter with a M6 screw. See Fig. 6.50.
Fig. 6.49 Overview of the gearbox inspection points
a Oil filler screw
b Oil level inspection glass
c Filter cap
d Oil drain plug
a
b
c
d
 CAUTION: In case of any chips contact Technify Motors GmbH.
 Note: The used gearbox oil filter must be labeled, stored in a clean
container and made available to Technify Motors GmbH on
request for the complete engine life time. The label must show
the aircraft serial number, registration number, engine serial
number, operation time and date.

Technify Motors CD-135 Specifications

General

Brand	Technify Motors
Model	CD-135
Category	Engine
Language	English