Operation & Maintenance Manual
CD-135 / CD-155
OM-02-02
Revision no.:
Revision date:
Chapter:
Issue:
Issue date:
Page:
Content:
02-OM-06-02
4
30.07.2014
71
74
7
20.07.2016
8. The current update status is displayed in the lower left
corner. See Fig. 6.60.
9. After a successful update, the following message will
appear. Please press "OK" to proceed to the next step.
See Fig. 6.61.
10. You will be presented the EASA Form 1. Please compare
the CRC checksum on the EASA Form 1 (see Fig. 6.63)
with the checksum on the information screen (see
Fig. 6.64).
Fig. 6.60 Update progress
Fig. 6.61 Update finished
Note: In case the update fails please check your CAN connection and
power supply for the FADEC. You can then restart the
application and go back to step 5. The Updater will recognize
the previously failed update and ask you what to do. As long as
you are connected to the same FADEC as before you can retry
the update by clicking on ‚Yes‘ (see Fig. 6.62). If you are
connected to another FADEC please select ‚No‘.
To Next Page
Loading...
Need help?
General
