Operation & Maintenance Manual
CD-135 / CD-155
OM-02-02
Revision no.:
Revision date:
Chapter:
Issue:
Issue date:
Page:
Content:
02-OM-06-02
4
30.07.2014
39
74
7
20.07.2016
2. Viewing the Event Log
The event log may be viewed without generating a file. For
data to be sent to Technify Motors GmbH, the complete
download appropriate to the situation should be used. Refer
to section 4 and 5.
a) Establish CAN communication, by connecting the
computer to the aircraft, starting the program and
powering up the FADEC.
b) Menu FADEC => Show Event Log
Note: Please use a compressed file format such as .zip to send any
data. This greatly reduces transfer times and facilitates data
handling on both sides. The tool offers this function
automatically for the regular maintenance download and the
extended download. After completing the download
(maintenance or extended), the folder for the desired engine will
contain a compressed file including all relevant data. Please
send only one compressed file containing all the appropriate
data for the event.
Note: The Tool gives the user the capability to view the eventlog
separately. This is not generally necessary, as the tool provides
all necessary files in a single download. Please proceed to
section 4 or 5 of this annex as appropriate.
To Next Page
Loading...
Need help?
General
