PG 11
The oven may also include a set of telescopic rails which can be positioned on dierent levels
and allow the oven racks or trays to slide in and out eortlessly.
• To un-clip the telescopic rail for cleaning or repositioning purposes you must apply outward
pressure on the underside of the telescopic rail to release, as shown in Fig 1 (Note: reverse
of rail shown).
• To re-fit the telescopic rail, locate the clip into the top rail on the shelf guide and push
downward, the rail will clip into place.
• The telescopic rail is designed to support either a shelf or grill / baking tray and can be
installed on any of the shelf positions as shown in Fig 2.
USE AND CARE
Telescopic rails
To Next Page
Loading...
