8
1. Immediate recording
Select this recording type, to record the broadcast currently showing immediately with the touch of a but-
ton.
2. Time-controlled recording
This function can be used to switch your digital receiver on and off for the selected broadcast, in order to
record onto the hard disk when you are away. The time can be channeld either manually or automatically
via the EPG function.
3. Timeshift recording
The timeshift recording function makes delayed TV viewing possible. With this function, even while the
recording continues, you can use a time-delayed playback.
Please note!
For technical reasons, it is not possible to receive two broadcasts, which are both transmitted in HD for-
mat, at the same time. The following combinations of recording and playback are possible:
- Record one broadcast and, at the same time, play back another broadcast of the same channel
(1 broadcast in HD format and 1 broadcast in SD format or 2 broadcasts in SD format) or a hard disk
recording.
- Record two broadcasts (1 broadcast in HD format and 1 broadcast in SD format or 2 broadcasts in SD
format) at the same time.
- Record two different broadcasts (1 broadcast in HD format and 1 broadcast in SD format or 2 broad-
casts in SD format) and play back a prerecorded broadcast.
Immediate recording
Manually start recording
Option 1
> Switch to the channel, which is showing the broadcast which you would like to record.
> Press the Record button to record the current broadcast. While the recording continues, the broadcast
is still displayed on the screen.
> To stop the playback of the current broadcast at a specic point, press the yellow function key Play/
Pause. While the recording continues in the background, a still picture appears on the screen.
> To continue the playback of this broadcast from this point, press the yellow function key Play/Pause
again. You will now view the broadcast with a time delay relative to the live transmission (Timeshift),
while the current broadcast is continually recorded in the background.
Option 2
> If you have to interrupt the viewing of a broadcast e.g. due to a telephone call etc., you can halt the play-
back of this broadcast by pressing the yellow function key Play/Pause and start recording the current
broadcast at the same time. While the recording starts in the background, a still picture appears on the
screen.
> To start the playback of the broadcast from this point, press the yellow function key Play/Pause again.
You will now view the broadcast with a time delay relative to the live transmission (Timeshift), while the
current broadcast is continually recorded in the background.
Manually end recording
> First press the OK button to end the recording.
> Press the green function key to access the PVR navigator. Use the arrow keys up/down to highlight the
current recording and conrm by pressing OK.
> Press the green function key Stop and a selection window appears.
> Use the arrow keys up/down to select Save, to save the recording onto the hard disk, or Cancel, to can-
cel saving of the broadcast and conrm by pressing OK.
To Next Page
Loading...
Need help?
General
