TechniSat DIGIPLUS UHD S2 User Manual

112
Antenna configuration (DVB-S / S2)
In this step of the installation you can adjust the setup to the configuration of your
satellite antenna.
> If you wish to accept the default antenna seing, press the OK buon.
> If the configuration of your reception equipment does not conform to the
default seing, press the Option buon.
> Now create the antenna seings according to your reception equipment, then
press theBack buon to return to the antenna configuration overview. For
more information please also consult the instruction manual.
> Then confirm with the OK buon to accept the seings.
Antenna configuration (DVB-C)
If you have activated digital cable > IP (DVB-C) reception in the Selecting the receive
signals step, you can now select the server seings.
You cannot receive DVB-C programs directly with the DIGIPLUS UHD S2. This is
only possible via a cable > IP server in the network.

TechniSat DIGIPLUS UHD S2 Specifications

General

Brand	TechniSat
Model	DIGIPLUS UHD S2
Category	Tuner
Language	English