TechniSat DIGIPLUS UHD S2 User Manual

111
DE
EN
IPTV provider
If you have activated the IPTV option when selecting reception signals, you can
configure a provider in this step.
If the DVB-IP source has been disabled, this page of the installation assistant
is not displayed; the "Network configuration" page is opened instead.
> If you use the service of an IPTV provider, select the desired seing using the
arrow keys and the OK buon.
> Select Apply and press the OK buon to apply the seings.
Number of antenna signals (DVB-S / S2)
If you have activated digital satellite reception (DVB-S / S2) in the Selecting the
reception signals step, you can now choose how many DVB-S / S2 antenna feeders
you have connected to the receiver.
> Use the right/le arrow keys to select whether you have connected 1 or 2
(twin operation) DVB-S antenna signals.
> Press the OK buon to open the selection list.

TechniSat DIGIPLUS UHD S2 Specifications

General

Brand	TechniSat
Model	DIGIPLUS UHD S2
Category	Tuner
Language	English