TechniSat DIGIPLUS UHD S2 User Manual

120
> Now select the desired filter option from the list that appears and confirm the
selection using the OK buon.
The channel list now only shows the channels that fit the desired criteria. In
order to filter the list further, follow the above steps again and set more filters
this way.
To remove all filters
> Open the Option menu using the OPT buon.
> Select the Filter option and press the OK buon.
> Now select [Reset all filters] and press the OK buon.
The full channel list is now displayed again.
11.3.6 Retrieving blocked channels
If a channel is selected that is blocked by the parental control function, the
messageDevice PIN will be displayed on the screen.
> Use the number buons to enter the device PIN.
The selected channel can now be viewed. Alternatively:
> Switch to a channel that is not blocked.
If global parental control is enabled, the device PIN code will be requested
again when the blocked channel is switched on. To make things easier for you,
you only need enter the PIN code once during each operating phase.
To do so, it is essential that you also observe the instructions and seings
regarding the global user-dependent parental controls (TechniFamily) in your
instruction manual.

TechniSat DIGIPLUS UHD S2 Specifications

General

Brand	TechniSat
Model	DIGIPLUS UHD S2
Category	Tuner
Language	English