TechniSat DIGIPLUS UHD S2 User Manual

126
Up arrow key Move picture up (only when picture height has been
enlarged)
Down arrow key Move picture down (only when picture height has been
enlarged)
OK buon Scroll through zoom levels
Le arrow key Reset user-defined format seing
> To hide the format switching screen, press the Back buon.
11.13 PiP / PaP function
Your device is equipped with both the PiP function (PiP = Picture in Picture), and the
PaP function (PaP = Picture and Picture). You can set which display you prefer under
Menu > Seings > Image seings > PiP / PaP mode.
See also the PiP / PaP section of the instruction manual.
The PiP / PaP function is not available for UHD broadcasters.
11.13.1 Calling up the PiP / PaP function
> Press the PiP / PaP buon to switch on the PiP or the PaP function.
11.13.2 Swapping PiP / PaP pictures
> Press the Back buon to toggle between the pictures. This toggles between
PiP / PaP and the main picture.
11.13.3 Exiting the PiP / PaP function
> You can exit the PiP or the PaP function both by pressing the PiP / PaP
buon and by pressing the TV/Radio buon.
11.14 Sleep timer
You can set the switch-o time of your TV using the sleep timer.
> You can set the sleep timer by pressing the Sleep timer buon a number of
times (15 minutes to 120 minutes), or switch it o.
Aer reaching the set time, the DIGIPLUS UHD S2 automatically switches to
standby mode.
Due to the new Europe-wide energy saving regulations, the device
automatically switches to standby if no operation has been carried out for 3
hours. This function can be configured under Menu> Seings > Basic seings
> Auto standby.

TechniSat DIGIPLUS UHD S2 Specifications

General

Brand	TechniSat
Model	DIGIPLUS UHD S2
Category	Tuner
Language	English