155
DE
EN
The picture sometimes
has square blocks
At times the device
switches to freeze frame
image, no sound. At times
the screen is black with
the message "no signal".
Heavy rain or snow Remove snow from
dish
Dish incorrectly aligned Re-align dish
Dish is too small at the
reception location
Use larger dish
There is an obstacle
between the dish and
the satellite (e.g. a tree)
Mount the dish in an
unobstructed position
No image, no sound,
display is illuminated
Short-circuit in the
LNB connection
Switch o device,
rectify short-circuit
Switch device on again
Defective or missing cable
connection
Check all cable
seings
Faulty LNB Replace LNB
Incorrect outdoor unit
set on the receiver
Modify seing
The antenna cannot be
rotated
Motor not suitable for
DiSEqC 1.2
Use suitable dish
Texts, e.g. in the info box
or EPG plus detailed info,
are dicult to read at a
distance
Character size is set to
"small"
Adjust character size
Device has no connection
to the network
Incorrect network
seings
Check network
seings
Network cable not
connected correctly
Check network
connection
Network connection not
allowed
Allow network connection
in Special functions >
Allow network.
DVR recording no longer
possible
Selected storage medium
is full
Delete existing
recording(s)
Insert and set a dierent
storage medium.
DVR recordings cannot be
deleted
File system on the storage
medium is
corrupt
Check storage medium