TechniSat DIGIPLUS UHD S2 User Manual

156
DVR recordings
are not displayed
Selected storage medium
is not
inserted.
Insert selected storage
medium
Correct the storage
medium seing
The device cannot be
operated, or switched on
or o
Faulty data stream -->
Device blocked
Press and hold the On/
Standby buon on the
remote control for approx.
5 seconds.
Remove the mains plug
for approx. 5 seconds,
then switch the device
back on
Perform flash reset:
Aention!
In doing so, all personal
seings are deleted and
the device starts with
factory seings
> Unplug the power
adapter from the device.
> Press standby and the
up arrow buon on the
device at the same time
and hold them down.
> While the standby and
up arrow buon are
pressed down, reconnect
the mains plug
> Keep the buons
pressed for approx. 5 secs.
and then release both
buons. The display
shows the message
“FLA5.”
USB device is not
detected
USB device is formaed in
the incorrect file system
Format USB device
in the FAT32 file system
Devices switches itself o
aer a specific time
Auto standby function is
switched on
Check auto standby
seing and, if required,
switch o.

TechniSat DIGIPLUS UHD S2 Specifications

General

Brand	TechniSat
Model	DIGIPLUS UHD S2
Category	Tuner
Language	English