TechniSat DIGITRADIO 3 - 11 Playing music from a USB device; 11.1 Controlling USB playback

76
> Press the Play/Pause buon to play the programmed tracks.
In order to add tracks to the current programming sequence, press the Stop
buon once. You can then place additional tracks in the next unoccupied
programme location.
In order to delete the programming when you are in programming mode,
press the Stop buon and start again. In order to end playback of a
programmed playback list, and to delete the programming, press the Stop
buon 2x during playback.
Changing the source, or removing the CD, also deletes the programming.
Folders cannot be selected with an audio CD. The F+/F- buons have no
function here.
10.9 Ejecting the CD
> Press the CD Eject buon (Eject, 12) on the front of the device to eject the CD.
11 Playing music from a USB device
You can play audio files stored on a USB storage device on the DIGITRADIO 3.
To play from a USB data medium, this must be connected to the USB port
(15).
The device does not support the connection of USB media (hubs, etc.) via a
USB extension cable.
Not suitable for direct connection to PCs!
The device supports USB media of up to 2TB, formaed in the FAT16 or FAT32
file format. The maximum file size for a media file is 4GB.
Music files types .mp3, .wma, .wav, .aac, .ogg can be played back.
> Switch to USB mode by pressing the MODE buon.
>
[USB] is shown on the display.
Playback starts automatically with the first track in the first folder.
BDA_DIGITRADIO_3_V11.indd 76BDA_DIGITRADIO_3_V11.indd 76 10/11/2020 09:4510/11/2020 09:45