77
DE
EN
FR
NL
The display for the categorisation/folder depends on the structure on your
USB medium. As such, pay aention to the information on the display.
The MP3/audio files are read and shown on the display in the form of the
total number of tracks [T] and albums [F]. Do not start the operation until the
content has been read completely, to ensure that all the required information
on the memory medium has been read.
If no storage medium has been connected or it cannot be read, [No Device]
appears on the display.
If there is no playback, the DIGITRADIO 3 switches to standby aer 15 minutes.
11.1 Controlling USB playback
> By pressing the Play/Pause buon, you can pause playback (the playing
time flashes on the display), or continue playback by pressing it again.
> Use the Stop buon to stop playback. The total number of tracks appears
on the display.
11.2 Selecting the track
> If required, select the categorisation or folder, and the subfolder it contains,
until you reach the track you want in order to play it.
> Folders/albums can be selected using the F- or F+ buons on the remote
control.
> Use the Previous Track or Next Track buons to skip to the next
or previous track.
The display shows the folder ([F]) and track ([T]) number set in each case.
11.3 Quick search
While the track is playing, you can perform a quick search forwards or backwards to
find a specific section.
> Hold down the Previous Track or Next Track buons to quickly skip
forwards or backwards within a track for as long as the buon is held down.
BDA_DIGITRADIO_3_V11.indd 77BDA_DIGITRADIO_3_V11.indd 77 10/11/2020 09:4510/11/2020 09:45