TechniSat DIGITRADIO 3 User Manual

84
14.4 Factory seings
If you change the location of the device, e.g. when moving house, it is possible that
the saved stations will no longer be received. In this case you can reset the device to
factory seings to delete all the saved stations and then initiate a new scan.
> Hold down the MENU buon and use the < or > buons to select the [Factory
seing] item. Press the OK buon.
> Using the < or > buons, select the [Yes] item to restore to the factory seing
and press the OK buon.
All previously stored stations and seings will now be deleted. The device is
now in the same state as when delivered.
> The display will show [Restart ...] and the device starts up with the
[Language] language selection. > Using the < or > buons, select one of
the available languages and confirm the selection by pressing the OK buon.
The device then automatically performs a complete scan in DAB mode. While
scanning, the display information shows the progress as well as the number
of digital radio stations detected. Aer completing the station scan, the first
DAB+ channel is played.
Alternatively, you can restore to factory seings using the 2 direct selection
buons.
To do so, disconnect the Digitradio 3 from the power supply. Then hold down
the Menu and the Direct selection buon 1 simultaneously and reconnect to
the power supply with the buons pushed down.
The device now starts with the user language selection.
14.5 SW version
Under SW version you can retrieve the currently installed soware version.
> Press the MENU buon and use the < or > buons to select the [SW Version]
item.
> Press the OK buon. The current soware version is displayed.
14.6 USB seings
In as-delivered condition, the USB connection on the device is activated as the
charging function. This allows you charge, or supply a connected device with power,
regardless of the operational status of the device. You can use the MENU > USB
menu item to disable this charging function. If you will be primarily connecting USB
media, we recommend disabling the charge function.
BDA_DIGITRADIO_3_V11.indd 84BDA_DIGITRADIO_3_V11.indd 84 10/11/2020 09:4510/11/2020 09:45

TechniSat DIGITRADIO 3 Specifications

General

Radio type	Portable
Tuner type	Analog & digital
FM band range	87.5 - 108 MHz
DAB III band range	174 - 240 MHz
Supported radio bands	DAB+, FM
Radio Data System (RDS)	Yes
Preset stations quantity	20
RMS rated power	20 W
Audio formats supported	AAC, MP3, WAV, WMA
Number of built-in speakers	2
Display type	OLED
Bluetooth version	4.1
Bluetooth profiles	A2DP, AVRCP
Docking station included	No
Apple docking compatibility	Not supported
Headphone outputs	1
Headphone connectivity	3.5 mm
Antenna type	External
Product color	Black, Silver, Walnut
Package depth	215 mm
Package width	480 mm
Package height	190 mm
Package weight	4590 g
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	5 - 90 %
Power source	AC/DC
AC input voltage	230 V
DC input voltage	12 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	168 mm
Width	380 mm
Height	130 mm
Weight	3570 g