TechniSat TECHNIRADIO SOLAR User Manual

48
9 System seings and other features
All seings explained in this section apply equally to all sources.
9.1 Sleep timer
The sleep timer automatically switches the TECHNIRADIO SOLAR OFF aer the set
time.
> Keep the Menu buon pressed and use the Next/Prev. buon to select the
item [System]. Press Select.
> Select the entry [Sleep] with Next/Prev. and press Select.
> Use Next/Prev. to select a period aer which the TECHNIRADIO SOLAR should
switch o. You can choose between O, 15, 30, 45, 60 and 90 minutes.
> Press the Select buon to apply the seing.
When the sleep timer is active, an "S" appears in the display with the
remaining time until it is switched o. If you want to switch o an active sleep
timer, select Menu > System > Sleep > O.
9.2 Time and date seings
9.2.1 Manually seing the time/date
Depending on the seing for time updates (Section 9.2.2), the time and date have to
be set manually.
> Keep the Menu buon pressed and use the Next/Prev. buon to select the
item [System]. Press Select.
> Select the entry [Time] with Next/Prev. and press Select.
> Select the entry [Set date/time] with Next/Prev. and press Select.
> The first digits (hours) flash and can be changed using the Next/Prev. buon.
Next increases the value, Prev. reduces the value.
> Press the Select buon to apply the seing.
> The next time digits (minutes) start to flash and can again be changed as
described above.
> Press Select aer every other seing in order to go to the next seing.
> To set the date, proceed in the same way as described above.
> Aer all seings have been done and the Select buon pressed, [Time
Saved] appears on the display.

TechniSat TECHNIRADIO SOLAR Specifications

General

Brand	TechniSat
Model	TECHNIRADIO SOLAR
Category	Radio
Language	English