Technogym Cable Stations - Replacing the Spring Hook

Cable Stations
27
Replacing the spring hook
Always replace the spring hooks as soon as you notice the slightest signs of wear, deformity,
diculty closing, or anything else that may interfere with its robustness.
When replacing, always use a spring hook supplied directly by Technogym. If it is impossible to
obtain an original part, use a spring hook that strictly meets the following minimum requirements:
- materials used: AISI 316 stainless steel;
- maximum capacity on main axis: 800 kg (1764 lb).
WARNINGS
Do not alter the spring hooks in any way.
Once a month, carefully check the conditions of the spring hook.