Technogym Climb - Extraordinary Maintenance; Transmission Parts and Fuses

Climb Excite
24
Extraordinary maintenance
Changing the transmission parts
W
After installation of the Climb product, transmission parts (belts, chains) must be replaced every 3 years.
If the buyer fails to replace these components, Technogym will be discharged from any liability for bodily injury or property damage arising out of the
malfunction of the product’s transmission unit.
For the replacement, contact the Technogym Technical Support Service.
Changing the fuses
W
Before making the replacement, turn o the product by moving the switch to
the 0 position and take the power plug out of the wall socket.
If no more of the supplied fuses are available, use certied fuses with identical
electrical specications (3.15A (F) for the replacement.
Remove the fuse holder, to the right of the switch, by pushing the lever.
Replace the blown fuse with a new one, as supplied.
Fit the fuse holder back into its housing, making sure it clicks in properly.