15
Spazio Forma
Contents
05092015
a
b
1.3.4 Levelling
Check that all four wheels of Spazio Forma are
touching the ground.
If they aren't, proceed with levelling.
Loosen the screw (a) with the hex wrench.
Turn the cam (b) with the supplied wrench.
Tighten the screw (a), holding the cam (b) still in
position.
cont.
1 Technical information
1.1 Equipment identification
1.2 Description of the equipment
1.3 Installation and assembly
1.3.1 Place of installation
1.3.2 Unpacking
1.3.3 Assembly
1.3.4 Levelling
1.3.5 Moving the equipment
1.3.6 Electrical connection
1.3.7 Grounding instructions
1.4 Maintenance
1.5 Easily solved problems
1.6 Technical assistance
1.7 Storage
1.8 Scrapping
2 Using the Spazio Forma
3 Spazio Forma software
To Next Page
Loading...
