TECHWOOD DDR 95 User Manual

-15-
Direct Tuning
Using this method, the required frequency is input
directly, using the numeric keys on the remote control
unit.
1. Press the TUNER button.
2. Select AM or FM by pressing the BAND selector
button.
3. Press the DIRECT TUNING button on the remote control
unit, “DIRECT IN” appears on the display for a few
seconds.
“FM ---.---MHz” or “AM----KHz” appears on the display.
4. Input the frequency of the broadcast you want to hear
with the numeric keys.
If you press the DIRECT TUNING button again or
without pressing any button for 30 seconds, Direct
tuning is released.
PLAY/
PA USE
TA PE
SEARCH
SEARCH
R.PLAY STOP
STOP
F. P L AY
PA USEREC/PAUSE
PA USE
VCR
VIDEO 1
VIDEO 2
MD
TA PE 1
TA PE 2
MONITOR
CD TUNER PHONO
TV
AUX
VIDEO 3
DVD
VIDEO 4
MEMORY
SCAN
DIRECT
TUNING
BAND PRESET CALL
FM : 100-kHz steps
AM : 10-kHz steps
Ex.: FM 107.50 MHz
Ex.: AM 1000 kHz
0
57
1
1000
Tuning
This feature is used to store FM, AM broadcasting from
Channel 1 to 30 respectively. You can set 30 AM and 30
FM stations in memory.
Automatic Memory Presetting
1. Select the TUNER mode by turning the FUNCTION
selector.
2. Select AM or FM by pressing the BAND selector
button.
3. Press and hold the MEMORY button for more than 1.5
seconds.
The start frequency will show in the display.
• 87.5 MHz in FM, 530 kHz in AM.
The frequency and display will automatically scan.
• 100 kHz steps for FM, 10 kHz steps for AM.
The frequency shown in the display will rapidly
change. As each station is located a preset number
will appear in the display indicating which preset
MEMORY button has been assigned to the station
located. The scanning process will continue to
operate in this fashion until 30 stations have been
found and entered into the preset memory or
when there are no more stations to be found on
the waveband chosen. The memory indicator will
extinguish and let you hear the first station to be
memorized.
To listen to the memorized station select the band
required and press the numeric keys 1, 2, 3 etc.
4. The last memorized channel of each band will be
displayed when Auto Memory is completed.
You can Check the programmed frequencies with
PRESET UP, DOWN button.
3
2
1
POWER ON

TECHWOOD DDR 95 Specifications

General

Brand	TECHWOOD
Model	DDR 95
Category	Receiver
Language	English