TECHWOOD DDR 95 User Manual

- 16 -
AUDIO OPERATIONS
Manual Memory Presetting
1. Select the TUNER mode by turning the FUNCTION
selector.
2. Select AM or FM by pressing the BAND selector
button.
3. Press the MODE button to change to TUNING mode.
(The PRESET CH. indicator disappears from the display).
4. Select the frequency you want to preset by pressing
TUNING/PRESET UP or DOWN button.
5. Press the MEMORY button briefly, MEMORY display
will blink at an interval of 1 second.
6. While the MEMORY indicator is lit, press the numeric
key(s) (on the remote control unit) to input the
channel number in which the data (AM or FM band
and frequency) for the broadcast is to be stored (or
press the PRESET button to the desired selection then
press the MEMORY button again).
Recalling Frequencies
Press the numeric key(s) (on the remote control unit)
corresponding to the channel number to tune directly to
a broadcast.
Using the Memory Scan function
(on the remote control unit)
When the MEMORY SCAN button is pressed, the preset
channels in which frequencies in the band (AM or FM)
selected have been stored are scanned at 5-second
intervals. When you hear a broadcast you want to listen
to, release the Memory Scan function by pressing the
MEMORY SCAN button again.
“Back-up” memory function
This function saves the already preset station
memories, and “Most-recent” memory function, even in
the event of a cut-off of power supply for up to 3 days.
POWER ON
Listening to Records and Compact Discs
1. Select the PHONO or CD mode by turning the
FUNCTION selector.
2. Play the turntable (with a moving magnet cartridge)
or CD player.
POWER ON
Turntable
CD Player
or
Playing MD/TAPE 1 Deck
1. Select the MD/TAPE 1 mode by turning the
FUNCTION selector.
2. Operate the MD deck or tape deck (TAPE 1) for play-
back.
POWER ON
MD Deck or Tape Deck 1

TECHWOOD DDR 95 Specifications

General

Brand	TECHWOOD
Model	DDR 95
Category	Receiver
Language	English