- 22 -
SURROUND EFFECTS
1. Select the desired surround mode.
2. Press the SURROUND ON/OFF button.
3. Start playing the video software.
When a Dolby Digital format signal is input, the
surround mode automatically switches to the DOLBY
DIGITAL mode.
4. Adjust the volume.
NIGHT MODE function (on the Remote
Control Unit)
When very dynamic movie soundtracks are played at
low volume, such as late at night, you can use Night
Mode to apply appropriate compression so that low-
level program content is not lost and high level effects
are restrained.
Playing Surround Sound
POWER ON
Manufactured under license from Dolby Laboratories.
Dolby Pro Logic and the double-D Symbol are
trademarks of Dolby Laboratories.
Confidential Unpublished Works.
© 1992-1997 Dolby Laboratories, Inc.
All rights reserved.
Manufactured under license from Digital Theater
System, Inc. US Pat. No. 5,451,942 and other world-
wide patents issued and pending. “DTS”,”DTS
Digital Surround”, are trademarks of Digital Theater
System, Inc.
Copyright 1996 Digital Theater System, Inc.
All Rights Reserved.
BACK-UP SYSTEM
Back-up Memory Function
This function stores the preset memory and most-recent
memory functions. In the event of a power failure, or if
the power cord of this unit is disconnected from the
electric outlet, the back-up memory will save the preset
memory and most-recent memory functions for
approximately 3 days.
If the power supply is interrupted for 3 days or longer,
the memory settings will be erased.
When to Use RESET Function
1. When this system is subjected to an electrical shock.
2. When the power is irregular.
In these cases, try the following (in POWER ON,
VCR/VIDEO 1 function):
- Front PANEL -
Press the MODE button for more than 5 seconds.
Note :
When the MODE button is pressed in VCR/VIDEO 1
function or standby mode, for more than 5
seconds, all the memory will be cancelled.
To Next Page
Loading...
Need help?
General
