TECHWOOD DDR 95 User Manual

- 30 -
SPECIFICATIONS
Amplifier Section
Output Power (Front) :
F.T.C. Rating:
130 watts RMS per channel minimum, both channels
driven into 8 ohms from 20 Hz to 20 kHz with no more
than 0.09% total harmonic distortion
(U.S.A./Canada model)
Surround Output Power (0.5% THD, 1 kHz, 8 ohms):
100 + 100 Watt (Front)
100 Watt (Center)
100 + 100 Watt (Rear)
Total Harmonic Distortion (Front) :
0.02 % (at 120 watts, 1 kHz)
Delay Time :
DOLBY DIGITAL : REAR : 0 - 15 ms
CENTER : 0 - 5 ms
DOLBY PRO LOGIC : REAR : 15 - 30 ms
Audio Input Sensitivity/Impedance :
PHONO : 2.5 mV/47 k ohms
*LINE : 220 mV/47 k ohms
Output Level / Impedance
TAPE 1/2 REC : 200 mV/2.2k ohms
Frequency Response :
PHONO : 20 Hz - 20 kHz, ±1 dB
*LINE : 20 Hz - 65 kHz, +1/ -3 dB
Signal-to-Noise Ratio :
PHONO : 70 dB (IHF-A)
*LINE : 95 dB (IHF-A)
Tone Control :
BASS : ±10 dB at 100 Hz
TREBLE : ±10 dB at 10 kHz
Digital Audio Section
Sampling Frequency :
DIGITAL 1/2 : 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
DIGITAL 3 : 32 kHz, 44.1 kHz, 48 kHz
DIGITAL Input Level/Impedance
DIGITAL 1 (COAXIAL) : 0.5 Vp-p/75 ohms
DIGITAL 2/3 (OPTICAL) : - 15 dBm ~ - 21 dBm
* LINE means CD, MD/TAPE 1, TAPE 2, VCR/VIDEO 1,
TV/VIDEO 2, AUX/VIDEO 3 and DVD/VIDEO 4.
Improvements may result in specifications and
features changing without notice.
Illustrations may differ slightly from production
models.
FM Tuner Section
(Without notes 100.1 MHz, 65 dBf)
Tuning Range :
87.5 MHz - 108.0 MHz (100 kHz steps)
Usable Sensitivity (IHF) :
Mono : 11.2 dBf
50 dB Quieting Sensitivity :
Mono : 15.3 dBf
Stereo : 38.5 dBf
Capture Ratio : 2.0 dB
Image Rejection Ratio : 45 dB
AM Suppression Ratio : 55 dB
Total Harmonic Distortion (1 kHz) :
Mono : 0.4%
Stereo : 0.5%
Frequency Response : 30 Hz - 15 kHz, +1/ -1.5 dB
Stereo Separation (1 kHz) : 40 dB
Signal-to-Noise Ratio :
Mono : 75 dB
Stereo : 70 dB
AM Tuner Section
Tuning Range :
530 kHz - 1,720 kHz 10 kHz steps)
Usable Sensitivity : 55 dB/m
Total Harmonic Distortion : 0.8% at 85 dB/m
Signal-to-Noise Ratio: 45 dB at 85 dB/m
Video Section
Input Sensitivity /Impedance : 1.0 Vp-p/75 ohms
Output Level /Impedance : 1.0 Vp-p/75 ohms
General
Power Requirements : 120 V AC, 60 Hz
Power Consumption : 3.0 A
AC Outlets : Switched x 2, Total 100 W max. (1 A max.)
Dimensions (W x H x D) : 435 x 165 x 400 mm
Weight (net) : 10.7 kg
Standard Accessories :
AM Loop Antenna x 1
FM T-Type Antenna x 1
FM Matching Transformer x 1
Remote Control Unit x 1
Battery (
AAA, R03, UM-4) x 2

TECHWOOD DDR 95 Specifications

General

Brand	TECHWOOD
Model	DDR 95
Category	Receiver
Language	English