CAUTIONPREFACE
BLAST CHILLER ISTRUCTION C-2003
THE FOLLOWING OPERATIONS
AND THOSE HIGHLIGHTED
BY THIS SYMBOL MUST NOT BE
P
ERFORMED BY THE APPLIANCE USER
In particular:
•
Electrical connections
• Water connections
• Installation
• Testing
• Repairing machine components
• Disassembly of the appliance
and/or its components
• Adjustments and calibration
• Cleaning the appliance and maintenance of:
- Electrical parts,
- Electronic parts,
- Mechanical parts,
- Refrigeration system parts
THE TEXT WITH THIS SYMBOL
IS OF PARTICULAR IMPORTANCE
OR POTENTIAL DANGER SIGNALS
NOTA claries the current operations
• This manual is an integral part of the pro-
duct, providing all the information requi-
red to ensure correct installation,
operation and maintenance of the ma-
chine.
• Read the manual carefully, making refe-
rence to it for machine operation. Keep
the manual in a safe place where it can be
accessed by all authorised operators (in-
stallers, operators and service personnel).
• The machine has been constructed in
compliance with the directives 73/23/CEE
(low-voltage), 89/336/CEE (electromagne-
tic compatibility) and 98/37/CE (machines;
for certain models only).
• Installation must be performed in com-
pliance with National and Local Standards,
by professionally qualified sta and accor-
ding to the manufacturer's instructions.
• Any contractual and extra-contractual lia-
bility of the manufacturer is excluded due
to damage caused by errors during instal-
lation and use and, however, failure to
comply with the National and Local Stan-
dards in force and the instructions sup-
plied by the manufacturer.
• Make sure that the supplied or specified
components are used.
• Before performing any cleaning or main-
tenance operation, disconnect the ap-
pliance from the electric power supply
mains by operating on the system switch
and/or the product switch.
• In the event of faults and/or bad functio-
ning, deactivate the appliance and do not
attempt any repairs or direct intervention.
To Next Page
Loading...
