EasyManua.ls Logo

Tecnoware EVO 1.0 - MAIN CHARACTERISTICS; EVO UPS Key Features

Tecnoware EVO 1.0
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11 MAIN CHARACTERISTICS
EVO offers all the modern characteristics which guarantee maximum reliability and security:
• Microprocessor control guarantees high reliability
• ON-LINE double technology without transformer
• Pure Sinewave
• Output voltage regulation +/- 2%
• Overload, overheating and short circuit protection
• AUTOMATIC BYPASS to protect from accidental overload or Inverter fault
• MANUAL BYPASS through switch on the rear side
• Switching ON even with no mains condition
• Automatic protection in case of discharged batteries
• After a shutdown caused by the end of autonomy and when mains condition is restored there
is an automatic SWITCHING On operation
• Automatic functioning test through a switch
• Automatic regulation to the input frequency 50 or 60 Hz
• Visual warnings by leds, indicating operational mode and low battery, overload and alarm
conditions
• Dry contact board (optional)
• SNMP Adapter (optional)
• EPO (Emergency Power OFF)
• Remote ON/OFF
• Acoustic signals of various kinds indicating alarm situations
• Communication with the computer by a RS-232 Interface and possible monitoring of
input/output voltage, frequency, output power, battery voltage, etc.
• Automatic turn on/off user-programmable by RS-232 Interface
• Protection filter for the telephone, ADSL and data line
• Possibility to increase the autonomy through External Battery boxes (optional)
• High reliability and high performances
• Easy to use
UPS EVO 4 User’s manual