Need help?Do you have a question about the Tecnoware EVO 2.0 and is the answer not in the manual?
Overview of the EVO Uninterruptible Power Supply features and purpose.
Details the buttons and LEDs on the front panel for UPS operation.
Describes the various connectors and switches located on the rear of the UPS unit.
Step-by-step guide on how to turn the UPS on and its initial self-test sequence.
Describes the normal operating state when AC power is stable and within specifications.
Explains operation when the AC input is directly connected to the outlets, usually due to overload or fault.
Procedure to test the UPS's ability to supply power from its battery under load.
Guidance on inspecting the UPS upon delivery and checking its contents.
Recommendations for locating and positioning the UPS for optimal performance and ventilation.
Information about the RS-232 communication port for connecting to a computer.
Instructions for routine checks and cleaning of the UPS unit.
Guidelines for maintaining battery health and performance through testing and charging.
Precautions to ensure the safe operation and prevent misuse of the UPS.
General| Capacity | 900 VA |
|---|---|
| Topology | Line Interactive |
| Waveform Type | Simulated Sinewave |
| Input Voltage | 220-240 VAC |
| Input Frequency | 50/60 Hz (auto-sensing) |
| Output Voltage | 220-240 VAC |
| Output Frequency | 50/60 Hz ± 1 Hz |
| Communication Interface | USB |
To Next Page