Tecnoware EVO 2.0 - TECHNICAL CHARACTERISTICS

16 TECHNICAL CHARACTERISTICS
EVO MODEL
EVO 1.0 EVO 2.0 EVO 3.0
1000 VA
(700 W)
2000 VA
(1400 W)
3000 VA
(2100 W)
POWER
NOMINAL INPUT VOLTAGE Single Phase 220/230 V
INPUT VOLTAGE RANGE + 20 % / -25 %
INPUT/OUTPUT FREQUENCY 50 / 60 Hz (automatic selection)
± 5%
INPUT FREQUENCY RANGE
NOMINAL OUTPUT VOLTAGE Single Phase 220/230 V
± 2%
OUTPUT VOLTAGE REGULATION
INVERTER WAVEFORM Sinewave
< 3%
THD (TOTAL HARMONIC DISTORSION)
OVERLOAD CAPABILITY < 150% for 30 seconds; > 150% for 10 cycles
TYPICAL TRANSFER TIME 0 ms (ON-LINE)
Uninterrupted transfer of 100% load from
UPS to Bypass and vice versa
AUTOMATIC AND MANUAL BYPASS
CERTIFICATIONS CE
8 – 15 minuts
AUTONOMY
36 96 96
NOMINAL BATTERY VOLTAGE
3 units
12V 7,2Ah
8 units
12V 7,2Ah
8 units
12V 7,2Ah
SEALED MAINTENANCE FREE LEAD ACID
BATTERIES
TYPICAL BATTERY CHARGE TIME 8 Hours
EXPANDABLE AUTONOMY Optional
AUDIBLE NOISE (at 1 metre) < 45 dBA
COOLING Fan cooling
WEIGHT 13 33 34
DIMENSIONS (L x H x P) 15 x 21 x 41 19 x 34 x 47 19 x 34 x 47
Temperature 0-40 °C Humidity 0-95% with no condensation
Maximum Height 3000 metres
ENVIRONMENTAL SPECIFICATIONS
COMPUTER INTERFACE 1 RS-232 port
UPS MANAGEMENT SOFTWARE Included UPSILON 2000 software with RS232 cable
SNMP INTERFACE Optional
EPO (EMERGENCY POWER OFF) Included
REMOTE ON/OFF Included
DRY CONTACTS BOARD Optional
FILTERED PHONE PLUG Plug RJ11/RJ45 included
WARRANTY 2 years
Technical data may change without prior notice
UPS EVO 14 User’s manual