TECO F510 series - Chapter 2 Model Description; 2.1 Nameplate Data; 2.2 Model Identification

9
2.4 Cooling Fan Supply Voltage Selection (400V class)
The inverter input voltage range of the F510 400V class models ranges from 380 to 460Vac.
In these models the cooling fan is directly powered from the power supply. Inverter models
F510-4150/ 4175/ 4215/ 4250/ 4300/ 4375/ 4425/ 4535/ 4670/ 4800-H3 requires the user to
select the correct jumper position based on the inverter input voltage ("400V" is the default
position for these models). Please select the correct position according to the input voltage. If
the voltage setting is too low, the cooling fan will not provide adequate cooling for the inverter
resulting in an over-heat error. If the input voltage is greater than 460Vac, select the “460V”
position.
(1) 400V： 150HP～250HP
(2) 400V：300HP～800HP
4KA69X571W01
4P108C0010103 VER.04
DM1
25CN
36CN
32CN
31CN
33CN
34CN
35CN
2
FU1
220V
440V
S
R
TB3
1
＋
220V
26CN
440V
TB4(220V)
380V 400/415 440V 460V
SA4
(
220V
)
JP1
JP2
JP3
JP4
4KA69X613W01
DM1
25CN
36CN
32CN
31CN
33CN
34CN
35CN
FU1
220V
440V
S
R
TB3 1
＋
220V
26CN
440V
TB4(220V)
380V
400/415
440V
460V
SA4(220V)
2
TB2
JP1
JP2
JP3 JP4