USING THE DEVICE
Turning the device on/off: Quick press the red (POWER/SLEEP) button.
Volume control: Rotate the [ VOLUME ] knob upwards or downwards to select your desired volume level.
Note: Volume control on this device is disabled when feeding audio through the [ LINE OUT ] socket.
VF mode
Flashing 2 times
VM mode
Flashing 3 times
(1) LISTENING TO RADIO
VF (View Frequency) and VM (View Memory)
VF: VF mode is used when searching for new radio signals. Quick press the [ VF/VM ] button. When the
frequency indicator flashes, the VF mode is activated.
VM: VM mode is used for recalling stations that have already been stored into the memory. Quick press the
[ VF/VM ] button. When the station memory indicator in the top right corner of the display flashes, the VM mode
is activated.
Note: When the memory contains no stored stations, it is not possible to access VM (View Memory) mode.
8
To Next Page
Loading...
Need help?
General