EasyManuals Logo

Tecsun H-501x User Manual

Tecsun H-501x
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
19
Setting the Alarm by Radio or Audio Player
Alarm by radio
1) Turn on the device, select the station frequency you want to use as the alarm.
2) Quick press [ MEM. ], the memory location will flash.
3) While still flashing, quick press [ TIMER A ] or [ TIMER B ], the alarm “ ” icon starts flashing.
4) While still flashing, quick press [ ], “ ” stops flashing and the setting is complete.
5) Make sure to adjust the volume to an appropriate level.
Alarm by audio player
1) Insert a microSD card containing audio files.
2) Enter the audio player mode and select the audio track you want to use as
the alarm.
3) Quick press [ MEM. ], the “ ” icon starts flashing.
4) While still flashing, quick press [ TIMER A ] or [ TIMER B ], the “ ” and
“ ” icon will flash simultaneously.
5) While still flashing, quick press [ ], “ ” and “ ” stop flashing and the setting is complete.
6) Make sure to adjust the volume to an appropriate level
Tips:
Once the preset alarm time is reached, the radio turns on and stays on for as long as the alarm duration (01 –
60 minutes) was set. To turn off the device during the alarm playtime, quick press the red (POWER/SLEEP)
button twice.
If you wish to change the radio frequency during the alarm playtime, quick press the red (POWER/SLEEP)
button. This will deactivate the alarm after which you can adjust the frequency.
If you wish to choose other audio tracks during the alarm playtime, quick press the red (POWER/SLEEP)
button. This will deactivate the alarm after which you can use the audio player normally.
Snooze Function
When the alarm goes off, press [ DISPLAY/SNOOZE ] to temporarily turn off the alarm. The alarm will go off
again after 5 minutes. To disable this feature while still snoozing, quick press the red (POWER/SLEEP) button.
Display Backlight
With the device on, press and hold the [ 5 ] (BACKLIGHT) button to set your preference:
“ON”: Backlight is set to always-on.
“OFF”: Backlight turns on when a button or tuning knob is operated and turns off after 5 seconds.

Table of Contents

Other manuals for Tecsun H-501x

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tecsun H-501x and is the answer not in the manual?

Tecsun H-501x Specifications

General IconGeneral
BrandTecsun
ModelH-501x
CategoryMedia Player
LanguageEnglish