To store a station manually
1. Turn on your radio, and tune into your favorite station.
2. Short press [M] button with a "B" sound.
3. Short press [M] button again to confirm with a long "B--" sound.
To store station with auto search function
1. Short press the [SCAN MODE] button with a "BB" sound.
2. Long press [SCAN MODE] button with a "B" sound to activate the Auto-scan function.
3. If you want to store that station, simply press on the [M] button to store the station with a
long "B--" sound. Keep store up your stations when auto search is activated unit it is
done.
4. To stop auto search function, simply press any buttons except [M] button.
LISTEN TO STATIONS IN THE MEMORY
Method 1: Manual memory search
1. Short press the [SCAN MODE] button with a "B" sound.
2. Rotate the [TUNING] knob for those stations in the memory.
Method 2: Auto scan memory
1. Short press the [SCAN MODE] button with a "B" sound.
2. Long press the [SCAN MODE] button with a "B" sound to activate the auto scan
memory function. It will search all the stations within the memory, and stop on each
station for 3 seconds.
3. To stop auto search memory, simply press any buttons except [DELETE] button.
Method 3: Direct memory access
1. Short press the [SCAN MODE] button with a "B" sound.
2. Use the numeric keypad to key-in the memory number. For example, if the desired
radio station is in memory number 006, just press 0, 0, 6, and it will go to memory
006.
NOTE:
When " - - - - " appeared in the display with a "B" sound after you key in a number of the
memory, means there is nothing stored.
DELETE MEMORY
Method 1: Manual delete memory
1. Short press the [SCAN MODE] button with a "B" sound.
2. Rotate the [TUNING] knob for those stations in the memory.
3. Long press the [DELETE] button with a "B" sound.
4. Short press [DELETE] button again to confirm with a long "B- -" sound.
Note:
If "DEL" is flashing more than 3 seconds without confirmation, it will exit the delete
function automatically.
To Next Page
Loading...
