Teka LP8 810 - LP8 820; LP8 825 Models; Service Test for LP8 820; LP8 825

Service Manual
Service Manual: MSDW16012 - 11 -
9. LP8 820 / LP8 825
1. ON/OFF button
8. Salt indicator
2. Delay button
9. Rinse indicator
3. Half load button
10. Display
4. Delay indicator
11. Program indicators
5. Half load indicator
12. Start / Pause button
6. Child lock indicator
13. Program button
7. Closed tap indicator
Wiring diagram:
See section 3
Optional Components:
None
Hydraulic diagram:
See section 2
Error indication:
Display
Service Test
Follow the next steps to launch the test service:
- Connect the appliance to the power supply.
- Keep pressed the Start / Pause button [12]. The door must be open.
- Press and release ON/OFF button [1]. All leds from control panel start to blink.
- Once the door is closed, service test will start.
You can advance to the next step of the test by pressing the Start / Pause button [12],
except during water loading.