Teka LP8 810 - Dw1 605 Fi; Dw1 455 Fi (Vr01;Vr02)

Service Manual
Service Manual: MSDW16012 - 19 -
17. DW1 605 FI / DW1 455 FI (VR01/VR02)
1. ON / OFF indicator
6. Half load button
2. Salt / Rinse indicator
7. Delay button
3. Delay indicator
8. Program button
4. Half load indicator
9. ON/OFF button
5. Program indicator
Wiring diagram:
See section 3
Optional Components:
Aquastop (inlet hose).
Hydraulic diagram:
See section 2
Error indication:
Service Test
Follow the next steps to launch the test service:
- Connect the appliance to the power supply.
- Keep pressed the Program button [8]. The door must be open.
- Press and release ON/OFF button [9]. All leds from control panel start to blink.
- Once the door is closed, service test will start.
You can advance to the next step of the test by pressing the Program button [8],
except during water loading.