Technology Solutions
Instruction Manual
Tek-Flux 1400A
www.tek-trol.com
1.4.2 Transportation
• Avoid impact shocks to the device and prevent it from getting wet during
transportation.
• Verify local safety regulations, directives, and company procedures with respect
to hoisting, rigging, and transportation of heavy equipment.
• Transport the product to the installation site using the original manufacturer’s
packing whenever possible.
1.4.3 Storage
If this product is to be stored for a long period of time before installation, take the
following precautions:
• Store your product in the manufacturer’s original packing used for shipping.
• Storage location should conform to the following requirements:
o Free from rain and water
o Free from vibration and impact shock
o At room temperature with minimal temperature and humidity variation
• Before storing a used flow meter remove any fluid from the flow meter line
completely. Properties of the instrument can change when stored outdoors.
To Next Page
Loading...
Need help?
General