1502C MTDR User Manual
3–1
Options and Accessories
The following options are available for the 1502C MTDR:
Option 04: YT-1 Chart Recorder
Option 04 instruments come equipped with a chart printer. Refer to the YT-1/
YT-1S Chart Recorder Instruction Manual that comes with this option for
instructions on operation, paper replacement, and maintenance. Refer to the
table on the following page for manual part numbers.
Option 05: Metric Default
Option 05 instruments will power up in the metric measurements mode.
Standard measurements may be selected from the menu, but metric will be the
default.
Option 07: YT-1S Chart Recorder
Option 07 instruments come equipped with a splashproof chart printer. Refer to
the YT-1/ YT-1S Chart Recorder Instruction Manual that comes with this option
for instructions on operation, paper replacement, and maintenance. Refer to the
table on the following page for manual part numbers.
Power Cord Options
The following power cord options are available for the 1502C TDR. Note that
these options require inserting a 0.15 A fuse in the rear panel fuse holder.
NOTE. The only power cord rated for outdoor use is the standard cord included
with the instrument (unless otherwise specified). All other optional power cords
are rated for indoor use only.
Option A1 220 VAC, 16 A, Universal Europe 161-0066-09
Option A2 240 VAC, 13 A, United Kingdom 161-0066-10
Option A3 240 VAC, 10 A, Australia 161-0066-11
Option A4 240 VAC, 15 A, North America 161-0066-12
Option A5 240 VAC, 6 A, Switzerland 161-0154-00
To Next Page
Loading...
Need help?
General
