Tektronix DPO2000 Series User Manual

Installation
2. Connect the oscilloscope to your computer
with the appropr iate USB or Ethernet cable.
NOTE. You need a DPO2CONN module to make
the Ethernet connection.
To communicate between the oscilloscope and
a GPIB system, connect the oscilloscope to
the TEK-USB-488 GPIB-to-USB Adapter with
a USB cable. Then connect the ada pter to
your GPIB system with a GPIB cable. Cycle
the power on the oscillosco pe.
40 DPO2000 and MSO2000 Series Oscilloscopes User Manual

Tektronix DPO2000 Series Specifications

General

Brand	Tektronix
Model	DPO2000 Series
Category	Test Equipment
Language	English