Tektronix DPO2000 Series User Manual

Acquire the Signal
Acquire the Signal
This section describes concepts of and procedures for setting up the o scilloscope to acquire the signal as you want it to.
Setting Up Analog Channels
Use fro nt-panel bu ttons and knobs to set up your oscilloscope to acquire signals using the analog channels.
1. Connect a P2221 prob e or a TekVPI probe
to the input signal source.
74 DPO2000 and MSO2000 Series Oscilloscopes User Manual

Tektronix DPO2000 Series Specifications

General

Brand	Tektronix
Model	DPO2000 Series
Category	Test Equipment
Language	English