Tektronix DSA70000D Series User Manual

Acquisition
4. If the instrument does not pass,
recalibrate the instrument, or have the
instrument se
rviced by qualified service
personnel.
NOTE. To always show the SPC status icon
or display a w
arning when SPC has not
been run in more than a month, click the
corresponding check box.
5. If the SPC needed icon is red, perform a
signal path compensation.
32 MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO /DP O5000 Series U ser Manual

Tektronix DSA70000D Series Specifications

General

Brand	Tektronix
Model	DSA70000D Series
Category	Test Equipment
Language	English