EasyManuals Logo

Tektronix MDO32 Installation And Safety Manual

Tektronix MDO32
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background image
3 Series MDO
Mixed Domain Oscilloscope
Installation and Safety Manual
www.tek.com
071-3608-00
Warning
The servicing instructions are for use by qualified personnel only. To avoid
personal injury, do not perform any servicing unless you are qualified to do
so. Refer to all safety summaries prior to performing service.
Supports 3 Series MDO Product Firmware V1.1 and above
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

Other manuals for Tektronix MDO32

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tektronix MDO32 and is the answer not in the manual?

Tektronix MDO32 Specifications

General IconGeneral
Analog Channels4
Digital Channels (Optional)16
Vertical Resolution8 bits
Digital Channel Resolution1 bit
Input CouplingAC, DC, GND
Timebase Accuracy±5 ppm
Operating Temperature0 °C to +50 °C
Record Length10 Mpoints
Waveform Capture Rate>280, 000 waveforms per second
RF Frequency Range9 kHz to 3 GHz (with MDO4RF option)
RF Capture Bandwidth≥1 GHz
Spectrum Analyzer Frequency Range9 kHz to 3 GHz (with MDO4RF option)
Arbitrary Function Generator (Optional)50 MHz
Voltmeter (Optional)4-digit
Input Voltage Range±40 V
ConnectivityUSB
Input Impedance1 MΩ
Max Input Voltage400 V (DC + peak AC)
Trigger TypesEdge, Pulse Width, Logic, Setup/Hold, Rise/Fall Time, Video
Bandwidth350 MHz, 500 MHz, 1 GHz

Related product manuals