Preface
This manual provides product safety and compliance information, describes how to connect and power on the oscilloscope, and
introduces the basic instrument features, controls, and operations. See the product Help file for more detailed information.
Key features
Welcome to the 3 Series MDO. The 3 Series MDO Oscilloscopes (MDO32 and MDO34) are 2- and 4-channel oscilloscopes,
enabling you to efficiently and cost-effectively perform mixed domain debugging.
■
A dedicated RF input channel for frequency domain measurements
■
Bandwidths from 100 MHz to 1 GHz
■
2- and 4-channels for time domain measurements
■
Sixteen-channel digital input option
■
Large 11.6” HD (1920 x 1080 pixel) capacitive touchscreen display
■
User interface optimized for touchscreen use
■
Sample rates of 2.5 GS/s on all analog channels (5 GS/s on 1 or 2 channels for the MDO34 or MDO32 with the 1 GHz
option)
■
10 M points record length on all channels
■
Maximum waveform capture rate: 280,000 waveforms/second, with FastAcq: >50,000 waveforms/second with normal
operation
■
Advanced triggering and analysis: I2C, SPI, USB 2.0, CAN, CAN FD, LIN, FlexRay, RS-232, RS-422, RS-485, UART, I2S,
Left Justified (LJ), Right Justified (RJ), TDM, MIL-STD-1553, ARINC429 (with the appropriate option), and Parallel
■
Power analysis (optional)
■
Arbitrary function generator and 16 digital channels (optional)
■
Digital voltmeter and trigger frequency counter free with product registration
MDO32, MDO34 Installation and Safety Manual vii
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
