Tektronix P6015A User Manual

Maintenance
P6015A Instruction Manual
2–15
Removal.
1. Unscrew the probe tip.
2. Unscrew the plastic probe handle from the outer body, and slide
the handle back on the cable. Slide the plastic outer body off the
front of the assembly.
3. Disconnect the cable BNC from the assembly.
Replacement.
1. Insert the ground lead connector through the slot in the outer
body. Insert the inner body assembly into the outer body. You
may have to lift up and forward on the ground lead to allow the
assembly to pass.
2. Connect the cable to the probe head BNC.
3. Screw the handle in place.
4. Replace the tip.

Tektronix P6015A Specifications

General

Brand	Tektronix
Model	P6015A
Category	Test Equipment
Language	English