Tektronix P6021 - Table 7: Equipment List

Service Information
P6021 Instruction Manual
15
Table 7: Equipment list
Item Description Recommended equipment
1
Oscilloscope TDS 420A, TDS 303X, or TDS 305X
Bandwidth DC to ≥200 MHz
Vertical sensitivity 1 mV/div
Measurement functions Amplitude, pk-pk, gated measurements,
averaging
Calibration generator
Fast rise step ≤1 ns,
1V
P-P
into 50 W
Wavetek 9100 with option 100:250 or
Tektronix PG 506A
Sinewave current 0.5 A
P-P
to 15 A
P-P
,
120 Hz to 10 kHz,
≤ ±0.60%
0.9 A
P-P
,
30 kHz,
≤ ±0.60%
Wavetek 9100
Sinewave voltage 5 V
P-P
into 50 W (100 mA),
50 kHz to >60 MHz,
1.5% flatness
Wavetek 9100 with option 100:250,
Tektronix SG 5030, SG 503
Digital Multimeter (DMM) 5 1/2 digits or better
Ke
ithl
ey 2
000, HP 3
458A
RMS ACV 50 mV to 1.0 V,
10 kHz,
≤±0.35%
30 mV to 160 mV,
30 kHz,
≤±0.45%
Coaxial cable 50 W, as specified for voltage sinewave
and pulse waveform calibrator outputs
Matching SG 503, PG 506A or
Wavetek 9100 cable
Termination, feedthrough BNC 50 W Tektronix Part Number 011-0049-01
Two attenuators 10X, 50 W Tektronix Part Number 011-0059-02
Coaxial cable 36-inch, 50 W precision Tektronix Part Number 012-0482-00
Adapter BNC male to GR Tektronix Part Number 017-0064-00
Fixture Current probe, calibration Tektronix Part Number 067-0559-00
Lead 4-inch, banana connectors Pomona B-4 or P-4
1
Or equivalent