Installation
RSA5100A Series Options
You can add the following options to your analyzer:
Option 11 - Adds Phase Noise and Jitter Measurement.
Option 12 - Adds Settling Time Measurement (Frequency and Phase).
Option 20 - Adds advanced signal analysis (including pulse measurements).
Option 21 - Adds general-purpose digital modulation analysis.
Option 40 - Adds 40 MHz real-time capture bandwidth.
Option 85- Adds 85 MHz real-time capture bandwidth.
Option 51 - Adds 10 MHz to 3 GHz Pre-Amplifier.
Option 52 - Adds frequency mask triggering.
Option 53 - Adds Memory, 4 GB Acquisition Memory Total.
Option 56 - Adds a r emovable hard disk drive ( not compatible with Option 57 or Option 59).
Option 57 - Adds a CD-R/W drive (not compatible with Option 56).
Option 59 - Adds a internal hard disk drive (not compatible with Option 56).
Option 200 - Adds Advanced DPX with D ensity, Time Qualified and Runt Triggers and Zero-Span.
Option 5040 – Combines Option 50 (Preamp) and Option 40 (40 MHz Acquisition BW). Mutually exclusive w ith
Options 50 and 40.
Option 5085 – Combines Option 50 (Preamp) and Option 85(85 MH z Acquisition BW). Mutually exclusive with Options
50 and 40.
RSA56KR – Rackmount for RSA5100A Series and RSA6100A Series analyzers.
6 RSA6100A Series & RSA5100A Series Quick Start User Manual
To Next Page
Loading...
