Installation
Adjusting the Windows Display Settings
To change the instrument display settings, use the Intel Graphics Driver instead of the default Windows display properties.
The Intel Graphics Driver provides additional capabilities that are not accessible from the Windows display properties
dialog box.
1. Open the W indows Control Panel.
2. Double-click Intel(R) Extreme Graphics
2Mto open the properties page.
3. Adjust the settings as necessary.
NOTE. Not all of the selections in the
property page will be available if there is no
external monitor c onnected to the instrument.
4. Click OK to apply the settings and to
close the properties page.
NOTE
. Although it is not recommended, you can attach a second monitor after the analyzer is powered on; however, after
connecting, you will still need to enable the Extended Desktop from the Intel Extreme Graphics 2M control panel.
RSA6100A Series & RSA5100A Series Q uick Start User Manual 13
To Next Page
Loading...
