Operation
2. In the Open dialog box, browse to the
location of the file.
3. If you do not see the fi le, s elect the type
of file under Fi
les of Type.
4. Double click
the file name to load the file.
Quick Tip
If you recall a trace that has an x-axis range that does not fall within the x-axis range of the current graph, the trace will not be
visible. A small arrow will point off-screen in the direction of the recalled trace. Use the Frequency and Span (or Span and
Offset) controls to bring the trace on the screen in the Spectrum display. In other displays, use Horizontal Scale and Offset
(which can also be used in the Spectrum display). These controls are on the Settings > Scale tab.
46 RSA6100A Series & RS A5100A Series Quick Start User Manual
To Next Page
Loading...
