Operation
8. Click the On button to enable audio
demodulation.
9. To specify the demodulation type, click
either the AM o
r FM button.
NOTE. Note that the AM and FM buttons
select only the demodulation type; they do
not specify a
frequency band.
10. S et the center frequency as needed.
The receiver frequency (frequency to
be demodulated) is specified with either
markers or
the frequency control (the
front panel Frequency button or the Freq
control in the toolbar). Use the Tune with
setting t
o specify whether markers or the
frequency control is used to specify the
receiver frequency.
11. Select either a marker or frequency
control
from the Tune with drop-down
list.
12. If the marker you select is not enabled
(it will be v isible in the display if it is
enable
d), click the Markers buttoninthe
toolbar to display the Markers toolbar.
64 RSA6100A Series & RS A5100A Series Quick Start User Manual
To Next Page
Loading...
